Mustang GT350 Forums banner

Upgrade Multimedia System (SYNC -> SYNC3 )

2270 Views 1 Reply 2 Participants Last post by  Smithydxb
Hi Guys,

I have Mustang GT350 2016 performance package with 4.2" display and Sync, and I'm planning to upgrade the multimedia system (LCD 8", Sync III Module, GPS, and the front Controls Interface Module (FCIM))
). The dealer in my country refused to upgrade because the SYNC III not available in the Middle East. So, I'm planning to get the parts from USA Dealer and install it. I mentioned the parts needed for the upgrade below. I hope you can help to identify if it's correct and possible to upgrade it?


PN#: 14D212
Audio Accessory Interface Module
Human Machine Interface 3 ICE Noise Reduction Module Human Machine Interface 4; With Navigation System, Sync III; Accessory Protocol Interface Module (Sync Module)

PN#:10D885
Audio Unit Display
Human Machine Interface 3 ICE Noise Reduction Module Human Machine Interface 4; Sync III; Front Display Interface Module (FDIM)

PN#:19980
HVAC Heater Control Box
Human Machine Interface 3 ICE Noise Reduction Module Human Machine Interface 4; Human Machine Interface 3; Front Controls Interface Module (FCIM)

PN#:10E928
GPS/FM Antenna Splitter
Human Machine Interface 3 ICE Noise Reduction Module Human Machine Interface 4; With Satellite Radio Reception, Sync III


I have multiple questions below. I appreciate if you can answer it:


  • What are the Human Machine Interface and noise reduction mean?
    What is the different between Human Machine Interface 3, 4, and 5?
    Do I need to upgrade the Audio Control Module (ACM)?
See less See more
1 - 2 of 2 Posts
Saleh,

Did you ever get this sorted?

I'm based in Middle East also and i'm about to purchase a 17 model and the local dealer only orders cars with base audio. I have sent all the part numbers to them along with a step by step guide on installing, which i could do myself, but want them to do it to keep warranty on things such as AC and all radio/nav equipment.

Did you order and install the parts yourself? Does it all work ok? Any issues from the local dealer on the upgrade and what was the rough cost of doing this yourself?

Thanks
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top