2016 GT 350.
Putting a Procharger P1 SC on a new build 5.2L Voodoo. Only parts on original blown motor used are crankshaft, both heads, original 4 cams. Everything else new from the bottom up.
Premier Performance speed shop specialist in GT 350's 😎
New build sheet signed, and check has been cut already 😁
Part: 3.700 BORE GEN 3 BLOCK
Quantity: 1
$2,300.00
Part: BELLHOUSING BRACE
Quantity: 1
$189.99
Part: BELLHOUSING
Quantity: 1
$673.96
Part: HEAD GASKET
Quantity: 1
$69.33
Part: HEAD GASKET
Quantity: 1
$69.33
Part: CYLINDER HEAD BOLTS
Quantity: 20
$77.80
Part: ROD BEARINGS
Quantity: 1
$135.99
Part: MAIN BEARINGS
Quantity: 1
$175.00
Part: OIL PAN GASKET
Quantity: 1
$89.96
Part: TIMING COVER GASKET
Quantity: 1
$80.95
Part: BILLET OIL PUMP GEARS
Quantity: 1
$325.00
Part: FEL-PRO ENGINE VALVE COVER GASKET SET
Quantity: 1
$106.48
Part: REAR MAIN SEAL
Quantity: 1
$89.63
Part: NGK SPARK PLUGS LTR7IX
Quantity: 8
$79.92
Part: MOTORCRAFT 5W50
Quantity: 10
$189.90
Part: OIL FILTER
Quantity: 2
$19.98
Part: 5W30 BREAK IN MOTOR OIL
Quantity: 10
$89.90
Part: COOLANT
Quantity: 3
$50.97
Part: TIMING CHAIN GUIDE SET
Quantity: 1
$129.99
Part: PROCHARGER KIT P1SC
Quantity: 1
$7,549.00
Part: FORD IGNITION COIL SET
Quantity: 1
$399.99
Part: MAHLE PISTONS WITH RINGS
Quantity: 1
$999.99
Part: TIMING CHAIN
Quantity: 2
$199.98
Part: MANLEY CONNECTING ROD
Quantity: 1
$880.00
Labor: SHORT BLOCK, R&R, MUSTANG, MANUAL TRANS
$3,619.00
Labor: DYNO TUNE
$749.99
Labor: ASSEMBLE TO SHORTBLOCK
$700.00
Labor: INSTALL SC WITH ENGINE
$840.00
Sublet: MACHINE SHOP ESTIMATE
$1,500.00
Total for this concern: $22,382.03
Customer Concern: EXTRA PARTS.
Approved
Fees
$80.00
Subtotal
$22462.03
Tax
$1622.70
Total
$24084.73
Payments Received
$24084.73
Remaining Balance
$0.00
$24K for my motor 😊
Already has Steeda Frame braces, and rear differential mount upgrades, and H-Pipe, and lower rear suspension front cross brace.
And Ram dual disc clutch and aluminum flywheel update already
Total Steeda and Ram upgrades $5,700.
6lbs boost - large pulley = 700 hp
8lbs boost - small pulley = 850 hp
A "screamer" in about 8 weeks - total cost 90K....
Thoughts?
Putting a Procharger P1 SC on a new build 5.2L Voodoo. Only parts on original blown motor used are crankshaft, both heads, original 4 cams. Everything else new from the bottom up.
Premier Performance speed shop specialist in GT 350's 😎
New build sheet signed, and check has been cut already 😁
Part: 3.700 BORE GEN 3 BLOCK
Quantity: 1
$2,300.00
Part: BELLHOUSING BRACE
Quantity: 1
$189.99
Part: BELLHOUSING
Quantity: 1
$673.96
Part: HEAD GASKET
Quantity: 1
$69.33
Part: HEAD GASKET
Quantity: 1
$69.33
Part: CYLINDER HEAD BOLTS
Quantity: 20
$77.80
Part: ROD BEARINGS
Quantity: 1
$135.99
Part: MAIN BEARINGS
Quantity: 1
$175.00
Part: OIL PAN GASKET
Quantity: 1
$89.96
Part: TIMING COVER GASKET
Quantity: 1
$80.95
Part: BILLET OIL PUMP GEARS
Quantity: 1
$325.00
Part: FEL-PRO ENGINE VALVE COVER GASKET SET
Quantity: 1
$106.48
Part: REAR MAIN SEAL
Quantity: 1
$89.63
Part: NGK SPARK PLUGS LTR7IX
Quantity: 8
$79.92
Part: MOTORCRAFT 5W50
Quantity: 10
$189.90
Part: OIL FILTER
Quantity: 2
$19.98
Part: 5W30 BREAK IN MOTOR OIL
Quantity: 10
$89.90
Part: COOLANT
Quantity: 3
$50.97
Part: TIMING CHAIN GUIDE SET
Quantity: 1
$129.99
Part: PROCHARGER KIT P1SC
Quantity: 1
$7,549.00
Part: FORD IGNITION COIL SET
Quantity: 1
$399.99
Part: MAHLE PISTONS WITH RINGS
Quantity: 1
$999.99
Part: TIMING CHAIN
Quantity: 2
$199.98
Part: MANLEY CONNECTING ROD
Quantity: 1
$880.00
Labor: SHORT BLOCK, R&R, MUSTANG, MANUAL TRANS
$3,619.00
Labor: DYNO TUNE
$749.99
Labor: ASSEMBLE TO SHORTBLOCK
$700.00
Labor: INSTALL SC WITH ENGINE
$840.00
Sublet: MACHINE SHOP ESTIMATE
$1,500.00
Total for this concern: $22,382.03
Customer Concern: EXTRA PARTS.
Approved
Fees
$80.00
Subtotal
$22462.03
Tax
$1622.70
Total
$24084.73
Payments Received
$24084.73
Remaining Balance
$0.00
$24K for my motor 😊
Already has Steeda Frame braces, and rear differential mount upgrades, and H-Pipe, and lower rear suspension front cross brace.
And Ram dual disc clutch and aluminum flywheel update already
Total Steeda and Ram upgrades $5,700.
6lbs boost - large pulley = 700 hp
8lbs boost - small pulley = 850 hp
A "screamer" in about 8 weeks - total cost 90K....
Thoughts?
