Mustang GT350 Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Hello all,
The great news is my gt350 was delivered last-purchased from out of state dealer ( by the way, highly reccomend Reliable Transport if you need a car shipped ).
Vehicle display tells me it's in transport mode and I need to see the dealer.
Bad news is my local Ford dealer is terrible and he'll never touch this unit. Next dealer is about 30 miles away.
2 questions:
1. What is transport mode ?
2. Is there a way for me to disable this without having to see the dealer ?
Thanks for your help.
Tim
 

· Registered
Joined
·
207 Posts
Youtube has several videos on how to do this. However, the start/stop button may complicate things. Transport mode is a battery saving mode and sometimes will go off on its own after approx 70 miles of normal driving. That being said, since you don't trust your local dealer, ask the selling dealer as they should be more than willing to help you.
The videos have you turn the key to the on position(don't start the engine), step on the brake 5 times then push the hazard button 4 times and the horn will blow once if successful. Now, the problem is to turn on the ignition without starting the engine.

Mike
 

· Registered
Joined
·
23 Posts
Discussion Starter · #3 ·
Youtube has several videos on how to do this. However, the start/stop button may complicate things. Transport mode is a battery saving mode and sometimes will go off on its own after approx 70 miles of normal driving. That being said, since you don't trust your local dealer, ask the selling dealer as they should be more than willing to help you.
The videos have you turn the key to the on position(don't start the engine), step on the brake 5 times then push the hazard button 4 times and the horn will blow once if successful. Now, the problem is to turn on the ignition without starting the engine.

Mike
Thanks.
Worked, no hitch.
Tim
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top