GT350.org banner

1 - 20 of 27 Posts

·
Registered
Joined
·
157 Posts
Discussion Starter #1
I have seen this in pictures on other cars and on ebay so I pulled the trigger and will be putting this on tomorrow

Havent done alot of mods to the car but my next mod will probably be the red brembo caliper swap

don

shelby.JPG
 

·
Registered
Joined
·
157 Posts
Discussion Starter #2
finished product ..... before and after pictures

don IMG_0753.JPG IMG_0754.JPG
 

·
Registered
Joined
·
157 Posts
Discussion Starter #4
Received a set of these for My car today.
its not as easy to get on as you would think ..... i get a real small flat head screw driver and be very careful ....

don
 

·
Registered
Joined
·
502 Posts
Just bought a set in Carbon Fiber for my Magnetic Grey! Thanks for the screwdriver tip.
 

·
Registered
Joined
·
157 Posts
Discussion Starter #7
As flimsy as these seemed when I put them on they have stayed put and no issues so both surprised and happy with my end product

don
 

·
Registered
Joined
·
11 Posts
As flimsy as these seemed when I put them on they have stayed put and no issues so both surprised and happy with my end product

don
Good post. A simple, elegant, appearance upgrade. The 3-M vinyl material may eventually get sandblasted in this vulnerable position - it's largely unavoidable - possibly why Ford elected to leave the splitter in its unadorned black state. We bought extra sets of decals for future replacement.

As for the color choice there are 3 coordinating options if you have stripes, body color, stripe color, and strips accent edge color. Also the matter of high contrast or low contrast with the black splitter.

Our Competition Orange GT350 with white stripes, supported either white lettering or orange lettering. In the end we chose orange because it was visible, but offered less contrast than the white. We're thinking your Race Red GT350 would also look great with red lettering, the white of course looks good.

GT350 Orange Splitter Decal.jpg

We used an X-ACTO knife to assist in positioning the lettering, but a small flat blade screwdriver tip would also work nicely as mentioned.

BTW the white windshield Shelby decal is functional in that it makes the radar detector less noticeable... This is a good read on The Drive re. the importance of radar detectors, of course a laser jammer where allowed, is also desirable... Why Radar Detectors Matter More Than Ever Why Radar Detectors Matter More Than Ever - The Drive
 

Attachments

·
Registered
Joined
·
157 Posts
Discussion Starter #10
yes I did ..... surprised but very durable though they didnt look like it when installing

don
 

·
Registered
Joined
·
757 Posts
Thanks for sharing, I like the color coordinated lettering or perhaps the carbon fiber prints...decisions... Voodoo, yellow would look great on yours!
 

·
Registered
Joined
·
502 Posts
Ok, got mine. I decided on Carbon Fiber for a Magnetic Grey/ black Stripe. Take your time, small screwdrivered helped a lot. Only thing is Carbon Fiber is almost black in certain lighting, benefit? Little.
 

·
Registered
Joined
·
502 Posts
I think I need to change up the Carbon Fiber for White? This is in shade.

23F5D4E7-80B1-463C-B2A3-994DC4E98D7D.jpeg
 
1 - 20 of 27 Posts
Top