Mustang GT350 Forums banner

350 R Tail

1717 Views 1 Reply 2 Participants Last post by  GT_Dave
Where would be a good place to buy a R Tail? Will holes line up with the stock tail?
1 - 2 of 2 Posts
Whether you go with the factory R spoiler @ $19,000 or an aftermarket @ $400 - $990, you will be drilling holes in the trunk lid.
The R spoiler from the factory uses 2 holes on each side to mount, only one hole on each side for the lesser spoilers. Some of the aftermarket spoilers use 4 bolts on each side to mount.
You will also have 3 holes in the center left exposed from the smaller spoilers.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top